Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the EGR Valve in Nissan X-Trail

Model: Nissan X Trail MK 3, T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: EGR valve

See other generations:
Video tutorial

To replace the EGR valve on a Nissan X-Trail 3, open the bonnet and locate the EGR valve connected between the exhaust manifold and the intake manifold. Disconnect the negative terminal of the battery for safety.

Remove any engine covers that obstruct access and disconnect the electrical connector of the valve, also detaching any connected pipes. Unscrew the bolts securing the valve to the engine and carefully remove it. Clean the contact surface, then position the new EGR valve with the correct gasket and screw in the bolts, tightening them evenly.

Reconnect the electrical connector and pipes, reassemble the engine covers, reconnect the battery and start the engine to check for leaks or malfunctions.


Posted on 9 April 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve from a Nissan X-Trail
How to Remove the EGR Valve from a Nissan X-Trail
Nissan X Trail (2007-2014 / MK 2, T31) .. you begin, open the bonnet of your Nissan X-Trail. Start by disconnecting the positive terminal of the battery to work safely. Next, remove the engine.. …
Where is the fuse box of the Nissan X Trail T30 located?
Where is the fuse box of the Nissan X Trail T30 located?
Nissan X Trail (2001-2006 / MK 1, T30) .. guide dedicated to all of you who own a Nissan X Trail T30, we will describe the various steps you need to take to locate the fuse box of the vehicle... …
Where to find the relays of a Nissan X-Trail?
Where to find the relays of a Nissan X-Trail?
Nissan X Trail (2001-2006 / MK 1, T30) .. and accessing the relays of your Nissan X-Trail. Start by opening the driver's front door. Next, remove the side carpet. Once removed, you will.. …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos