Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve from a Nissan X-Trail

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: EGR valve

See other generations:
Video tutorial

Before you begin, open the bonnet of your Nissan X-Trail. Start by disconnecting the positive terminal of the battery to work safely.

Next, remove the engine cover. After that, unscrew and remove the two bolts of the electrical connector near the EGR valve using a ten-millimetre spanner, then remove the hose.

This will give you access to the EGR valve. Proceed to unscrew the bolts securing it, then disconnect everything attached to it. Once this step is complete, you can remove the valve, and you will have finished the disassembly.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the EGR Valve in Nissan X-Trail
How to Replace the EGR Valve in Nissan X-Trail
Nissan X Trail (2014-2023 / MK 3, T32) .. To replace the EGR valve on a Nissan X-Trail 3, open the bonnet and locate the EGR valve connected between the exhaust manifold and the intake.. …
Where to find the relays of a Nissan X-Trail?
Where to find the relays of a Nissan X-Trail?
Nissan X Trail (2001-2006 / MK 1, T30) .. and accessing the relays of your Nissan X-Trail. Start by opening the driver's front door. Next, remove the side carpet. Once removed, you will.. …
Where is the fuse box of the Nissan X Trail T30 located?
Where is the fuse box of the Nissan X Trail T30 located?
Nissan X Trail (2001-2006 / MK 1, T30) .. guide dedicated to all of you who own a Nissan X Trail T30, we will describe the various steps you need to take to locate the fuse box of the vehicle... …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos