Do it yourself
Frequently asked questions about cars and motorcycles

How to fix the design flaw of the Nissan Primastar where water accumulates in the door

Model: Nissan Primastar MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Body

See other generations:
Video tutorial

This is a design flaw on the Nissan Primastar: rainwater seeps into the cabin and tends to collect around the internal support handle (the one we use to close the door). The signal is a constant dripping when it rains, wet carpets, mold, and bad odors in the cabin.

The problem is not the handle itself, but the inadequate design of the roof seal, which is not continuous or does not adhere along its entire path, especially in the top corner. The roofs of this van have channels for water drainage, but if they get clogged, water finds the easiest way to flow, which is inside the roof, and then follows the path of least resistance, flowing along the internal structure and coming out at the lowest point: the handle.

The solution in the video is not a solution; the solution is to keep the drainage channels clean, and also to seal the seals with a good automotive sealant. If the seal is very damaged, it may be a good idea to replace it with a new one.


Posted on 13 November 2025 by ScegliAuto


Related tutorials

Nissan Primastar (2001-2016 / MK 1) Below we will see the instructions that will allow us to reset the maintenance service light for the oil change of the Nissan Primastar. First of all…
Nissan Primastar (2021-2026 / X82) You can completely clear the Service light on the Nissan Primastar by inserting the ignition key into the corresponding slot and turning on the ignit…
Nissan Primastar (2001-2016 / MK 1) To reset the Oil Change light on a Nissan Primastar, insert the ignition key into the ignition barrel so that it can be turned on, illuminating the i…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos