Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Pathfinder
    4. : How to remove the door panel of a Nissan Pathfinder

Nissan Pathfinder - Video tutorial

Model: Nissan Pathfinder R51, MK 3 - Years 2005-2012
Part: Door panel
Operation: How to remove the door panel of a Nissan Pathfinder

Is the door panel damaged or do we want to remove it? Let's see how the door panel of a Nissan Pathfinder is removed. We disconnect the window control panel (disconnect the power supply terminals). We remove the plastic covering around the door opening lever. Unscrew the remaining screws on the door panel and detach the clips for tightening it. Remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We carry out the replacement of the door. We mount the new door panel or the damaged piece inside.


Posted on 8 December 2023 by ScegliAuto



How to disassemble the rear tailgate panel of the Nissan Pathfinder.
Nissan Pathfinder (2012-2020 / R52, MK 4) The main steps outlined in this guide will show us how to disassemble the rear door panel, allowing us to access the lock of the Nissan Pathfinder. F
How to remove the door panel on a Nissan Pathfinder
Nissan Pathfinder (2012-2021 / ) Removing the panel of a Nissan Pathfinder? Let's see the disassembly of the panel. We remove the caps from inside the opening lever space and from in
Replacing the door courtesy light bulb on the Nissan Pathfinder
Nissan Pathfinder (2005-2012 / R51, MK 3) Let's briefly see the instructions on how to remove and replace the door courtesy bulb, located at the bottom of the door panel, of the Nissan Pathfi

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos