Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Unlocking the Boot Release from Inside the Nissan Note

Model: Nissan Note E11, MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Trunk lock

See other generations:
Video tutorial

When the rear boot of the Nissan Note gets stuck and cannot be opened from the outside, you can unlock the release mechanism from inside the car. Start by removing the plastic panel of the rear tailgate. Using a small plastic pry tool, unclip the various clips holding it in place (as shown in the video).

At this point, locate the boot lock and remove the protective cover by acting on the fastening clip at the bottom right. Once done, identify the mechanism for opening the boot (as seen in the images, it is located on the lock facing into the cabin) and move the corresponding lever downwards (as indicated in the video), thus opening the boot.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the External Handle on a Nissan Note?
How to Replace the External Handle on a Nissan Note?
Nissan Note (2004-2013 / E11, MK 1) To replace the external handle on a Nissan Note, open the door to detach the circular rubber grommet located on the side near the handle. Removing th…
How to Open the Boot in an Emergency on a Nissan Note
How to Open the Boot in an Emergency on a Nissan Note
Nissan Note (2004-2013 / E11, MK 1) Today, you will learn how to open the boot in an emergency if it does not open due to a lock failure, on a 2013 Nissan Note. Access the boot area fro…
How to replace the license plate light of the Nissan Note
How to replace the license plate light of the Nissan Note
Nissan Note (2012-2022 / MK 2, E12) Today we will explain how to replace the license plate light of a Nissan Note model II car, produced from 2013 to 2017. The license plate light bulb …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos