Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Car Radio

Model: Nissan Almera N16, MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Car stereo

See other generations:
Video tutorial

Using a plastic lever, detach the air vents located at the top of the centre console and disconnect the connector for the parking indicator switch; then unclip the glove compartment located just below the climate control knobs. At this point, you can access the four screws securing the car radio at each corner.

Unscrew the four screws and pull the car radio out of its housing along with the trim surrounding the climate control buttons, and disconnect the connectors attached to it.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Replace the Car Radio in the Nissan Almera?
How to Replace the Car Radio in the Nissan Almera?
Nissan Almera (2000-2008 / N16, MK 2) In this tutorial, you will see how to replace the car radio in the Nissan Almera, a very simple and quick operation. First, ensure that the key is no…
Removing the Radio from Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) The tray above the radio has two small side slots: use a small flat screwdriver to lever in these slots and it will come out of its seat. Once the tr…
Removing Car Radio on Nissan and Daewoo Cars
Removing Car Radio on Nissan and Daewoo Cars
Nissan Almera (2000-2008 / N16, MK 2) First, remove the lower plastic trim of the central dashboard, which is near the 12V socket/cigarette lighter. Then, using a small plastic lever (to …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos