Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the ventilation nozzles of the Nissan Altima

Model: Nissan Altima L34 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Air vents

See other generations:
Video tutorial

The information provided in this guide will explain the steps on how to disassemble and replace the side ventilation nozzles of the Nissan Altima. First, we open the front door of the vehicle and remove the plastic cover on the side of the dashboard; then we remove the plastic cover located under the ventilation nozzle to detach and remove it, as shown in the video.

At this point, we clean or replace the air diffuser, properly attaching the nozzle to the dashboard; then we reassemble the plastic covers, following the reverse process!


Posted on 6 August 2025 by ScegliAuto


Related tutorials

How to Replace the Radio in a Nissan Altima
How to Replace the Radio in a Nissan Altima
Nissan Altima (2007-2012 / L32) In today's video, see how to replace the original radio in a Nissan Altima. Remove the upper trim (where the air vents are) using a plastic pry tool …
How to Replace the Outside Rearview Mirror on a Nissan Altima
How to Replace the Outside Rearview Mirror on a Nissan Altima
Nissan Altima (2007-2012 / L32) To replace the outside rearview mirror on a Nissan Altima, loosen the screws securing the door panel: these are located inside the handle recess and …
How to Replace the Cabin Air Filter in the Nissan Altima?
How to Replace the Cabin Air Filter in the Nissan Altima?
Nissan Altima (2013-2018 / L33) To replace the cabin air filter in the Nissan Altima, detach the side cover of the footwell, near the center console. Once this panel is removed, acc…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos