Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from Nissan Almera

Model: Nissan Almera N16, MK 2 - Years 2000-2008
Part: Car stereo

The tray above the radio has two small side slots: use a small flat screwdriver to lever in these slots and it will come out of its seat. Once the tray is removed, unscrew the two screws now exposed above the radio. That's it! This is all you need to extract the radio from its compartment. Once done, disconnect the connectors and the antenna for complete removal (if you can't do it by hand, use the flat screwdriver again, as shown in the video). For complete reassembly, proceed in reverse: connect the cables to the new radio, insert it, and screw in the two screws.

Updated on 5 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removing the Switch Panel from a Nissan Almera Door
Nissan Almera (2000-2008 / N16, MK 2) Is the switch panel on your Nissan Almera faulty and needs replacing? Here's how to remove it from the top of the panel. Using a plastic or metal lev…
Removing the Door Panel on a Nissan Almera
Removing the Door Panel on a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) In this video, you will see how to replace the door panel on a Nissan Almera. First, open the door and remove the screws located along the edge of th…
Removing the Antenna from a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) In today's video tutorial, you will learn how to remove the antenna from a first-generation Nissan Almera N16. First, get inside the vehicle and remo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos