Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Antenna from a Nissan Almera

Model: Nissan Almera N16, MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Antenna

See other generations:
This video is currently unavailable

In today's video tutorial, you will learn how to remove the antenna from a first-generation Nissan Almera N16. First, get inside the vehicle and remove the interior light cover by prying at the sides; then, press the levers to release the entire lamp holder along with the bulbs.

At this point, remove the plastic frame of the light cover and use pliers to disconnect the antenna cable: then push the screw and extract the antenna and its base from the outside, as shown in the video.

Reassemble everything by applying the reverse procedure!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Antenna on the Nissan Almera
How to Remove and Replace the Antenna on the Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) In this video tutorial, you will see the steps necessary to remove and replace the antenna on the Nissan Almera. First, get inside the vehicle and st…
Removing the Radio from Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) The tray above the radio has two small side slots: use a small flat screwdriver to lever in these slots and it will come out of its seat. Once the tr…
Removing the Door Panel on a Nissan Almera
Removing the Door Panel on a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) In this video, you will see how to replace the door panel on a Nissan Almera. First, open the door and remove the screws located along the edge of th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos