Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Gear Knob on Nissan Micra

Model: Nissan Micra K11 - Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Shift knob

See other generations:
Video tutorial

Want to remove the gear knob from the Nissan Micra? Here’s how to replace the knob from above the centre tunnel. Hold the knob in your hands and twist it left and right until it comes off the gear stick.

Use a plastic lever to disconnect the leather gaiter frame (if damaged). Fit the new leather gaiter with the clips (if removed), then take the new knob and push it onto the stick on the centre tunnel until fully secured.

Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted. Install a knob of the same size.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to Remove the Gear Knob on the Micra K11
How to Remove the Gear Knob on the Micra K11
Nissan Micra (1992-2002 / K11) Is the gear knob on your Micra K11 damaged? Let's look at removing the knob and the gaiter. Take the knob in your hands and rotate it to the left unt…
How to Remove the Gear Knob on the Micra K12
How to Remove the Gear Knob on the Micra K12
Nissan Micra (2002-2010 / K12) Let's look at removing the knob and the gaiter covering the stick. Take the knob in your hands and rotate it left and right until you can remove it f…
How do you disassemble the heating control in the Nissan Micra?
How do you disassemble the heating control in the Nissan Micra?
Nissan Micra (2002-2010 / K12) The air conditioning knob seen in the video is present inside the Nissan March, but since these controls are similar to each other, we can take inspi…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos