Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the headlight bulb on a Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Headlight bulb
Operation: How to replace the headlight bulb on a Nissan Qashqai

Before we can start, we will have to go and open the front hood of our Nissan Qashqai. The electrical connector for the bulb is located in the lower right corner of the engine compartment. We then proceed by going to rotate this connector ninety degrees clockwise, and then remove it from its housing. By doing so, we will have reached the burned out light bulb. To remove it, it will be necessary to go to disconnect the relative plug, and we will have finished the disassembly. To mount the new bulb and close everything, all we have to do is repeat these few steps in reverse, and we will have successfully completed the replacement.


Posted on 4 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2006-2014 - How do you replace the front headlight bulb on a Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos