Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Qashqai
  6. : How to replace the rear license plate lamp of a Nissan Qashqai

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: License plate light
Operation: How to replace the rear license plate lamp of a Nissan Qashqai

Using a small slotted screwdriver and prying, we start by removing the entire block of the license plate light of our Nissan Qashqai, thus reaching the burned out bulb. We then proceed by going to extract it from its housing, and then remove it. Once we have removed the burnt out bulb, we will have successfully completed the disassembly. At this point, to mount the new bulb and reassemble the relative block, we will simply have to repeat these instructions in reverse. When we have completed this step, the bulb replacement will be complete.


Posted on 8 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos