Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Number Plate Bulbs on Nissan Cars

Model: Nissan Qashqai J11 - Years 2014-2022
Part: License plate light

Use a plastic trim tool (not metal) or a screwdriver to pry and remove the small bulb holder above the number plate. Once extracted, slightly rotate the bulb in its holder to detach it. Now unscrew the burnt-out bulb. Perform this operation for each bulb that no longer works. Before reassembling, ensure the polarity is correct so that the bulb lights up. Refit the small bulb holder, clipping it back into the bodywork by inserting the right-hand side first.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Number Plate on a Nissan Qashqai J11
How to Remove the Rear Number Plate on a Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, we will see the steps to remove the rear number plate and holder on a Nissan Qashqai J11, second series, and how to eliminate the vibr…
How to Change the Interior Bulbs on a Nissan Qashqai?
How to Change the Interior Bulbs on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) The video shows how to replace the interior bulbs of the Nissan Qashqai. Specifically, this involves the bulbs in the cabin and the boot. Start by re…
How to Remove the Rear Headlight and Bulbs on the Nissan Qashqai
How to Remove the Rear Headlight and Bulbs on the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today, let’s look at the instructions that will allow you to remove and replace the rear headlight and its bulbs on the Nissan Qashqai. First, open t…

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos