Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Instrument Cluster on Nissan Micra K11

Model: Nissan Micra K11 - Years 1992-2002
Part: Instrument cluster

To begin, remove the two screws clearly shown in the video that secure the plastic under the steering wheel, then pull off the instrument cluster cover by hand, shaking it slightly. This will give you access to the three screws that secure the cluster: one upper and central, and two lower and more lateral. Once done, simply pull the cluster out from the rear clip and disconnect the cables. That's it! As you can see, this is a fairly simple operation within everyone's reach. Proceed in reverse for reassembly.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Instrument Cluster Bulbs on a Nissan Micra K11
Replacing Instrument Cluster Bulbs on a Nissan Micra K11
Nissan Micra (1992-2002 / K11) In this video tutorial, you will learn how to remove and replace the bulbs in the instrument cluster of a Nissan Micra K11. First, get inside the veh…
How to Reset the Service Light on a Nissan Micra K11
How to Reset the Service Light on a Nissan Micra K11
Nissan Micra (1992-2002 / K11) Today, I will show you how to reset the service light on a Nissan Micra model K11, produced from 1992 to 2002. To perform the reset, close all the do…
How to reset the service light on the Nissan Micra
How to reset the service light on the Nissan Micra
Nissan Micra (1992-2002 / K11) Performing independently the steps related to resetting the service light on a Nissan Micra K11 model car is a really simple and quick operation. The…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos