Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fuel Filter on a Nissan Micra

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Fuel filter

See other generations:
Video tutorial

Working with the engine off and the handbrake engaged, lift the front bonnet and locate the fuel filter clearly shown at the beginning of the video: it is located on the driver's side and quite close to the windscreen, thus in the lower part of the engine bay. Using a cross screwdriver, loosen the clamp of the pipe going to the filter and disconnect it with some force (put rags in the area as some fuel will obviously spill out). Disconnect the connector and uncover the filter housing, then remove the old filter and insert the new one. Proceed in reverse for reassembly.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Filter on a Nissan Micra
How to Remove the Fuel Filter on a Nissan Micra
Nissan Micra (2002-2010 / K12) Here’s how to remove the fuel filter mounted on a Nissan Micra: lift the car on a column lift or suitable jack, locate the fuel filter (as shown in t…
Replacement of the fuel filter of the Nissan Micra 1.4
Replacement of the fuel filter of the Nissan Micra 1.4
Nissan Micra (2002-2010 / K12) Today we will see the steps that will allow us to disassemble and replace the fuel filter of the Nissan Micra 1.4. First of all, we open the hood and…
How to Replace the Fuel Filter on a Nissan Micra
How to Replace the Fuel Filter on a Nissan Micra
Nissan Micra (2002-2010 / K12) The fuel filter, specifically for petrol, on a Nissan Micra is located under the front bonnet on top of the engine. The filter's job is to catch all …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos