Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : Replacement of rear jaws

Nissan Micra - Video tutorial

Model: Nissan Micra K11 - Years 1992-2002
Part: Drums and shoes
Operation: Replacement of rear jaws

Raise the car on suitable car stands and remove the rear wheel; with a few blows of the hammer, extract the drum from the hub and, in the same way, remove the protective cap from the nut fixing the hub itself. At this point unscrew the nut and extract the hub. Clean the jaws and the drum with compressed air and disassemble the jaws by removing the centering pins and the springs; the latter must be applied to the new jaws. Then house the new ones in their seat by hooking the handbrake cable and inserting the centering pins for fixing. Then reassemble the hub, carefully tighten the fixing nut, adjust the opening of the jaws through the appropriate screw and reassemble the drum making sure that it rotates freely. Tap the nut back with a chisel to prevent it from accidentally unscrewing and refit the cap and wheel.


Posted on 19 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Micra 2010-2017 - How much does it cost to replace the rear brake shoes on a Nissan Micra? Read Answer

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos