Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Parking Sensors of the Nissan Juke?

Model: Nissan Juke MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the parking sensors of the Nissan Juke, first extract the control unit from the side cover located inside the boot. Once the control unit is removed, disconnect the cable related to each sensor to identify which one needs replacing.

Once the faulty sensor is identified, proceed to remove the bumper and take out the sensor from the inside. The new sensor should then be connected to the corresponding connector and inserted into its housing in the bumper.

After the replacement, the bumper can be reattached.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Nissan Juke?
How to Reset the Tyre Pressure Warning Light on a Nissan Juke?
Nissan Juke (2010-2019 / MK 1) The tyre pressure warning light that appears on the instrument cluster of the Nissan Juke can be reset by inflating the tyres to the recommended pres…
How to remove the rear bumper from the Nissan Juke
How to remove the rear bumper from the Nissan Juke
Nissan Juke (2010-2019 / MK 1) Removing the rear bumper from a Nissan Juke takes about 30 to 40 minutes and requires some screwdrivers and plastic tools. Start with the wheel arche…
How do you reset the tire pressure warning light on the Nissan Juke?
How do you reset the tire pressure warning light on the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) It will be possible to make the tire pressure warning light disappear completely from the instrument panel of the Nissan Juke by first inflating the …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos