Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check Brake Fluid Level

Model: Nissan Primera MK 3 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Brake fluid

Video tutorial

For the braking system of a car to function correctly, there must be enough fluid in the system. The following guide shows you how to check the brake fluid.

This operation should be carried out with the vehicle stationary and the engine cold, with the bonnet open. Locate the brake master cylinder; above it, there is a small reservoir where you can check the fluid level, which should be between the minimum and maximum lines for it to be adequate.

If necessary, add brake fluid to this reservoir carefully, avoiding any spillage due to its corrosive nature.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Reset the Immobiliser on a Nissan Primera
How to Reset the Immobiliser on a Nissan Primera
Nissan Primera (2002-2008 / MK 3) Today, I will explain how to reset the immobiliser control unit on a 2002 Nissan Primera. To perform this operation, we need to remove the lower part…
What is the Fuse Box Diagram for the Nissan Primera?
What is the Fuse Box Diagram for the Nissan Primera?
Nissan Primera (2002-2008 / MK 3) In this video, see where the fuse boxes of the Nissan Primera are located and their respective diagrams, useful if you need to check the fuses of a m…
How to reset the service light on a Nissan Primera
How to reset the service light on a Nissan Primera
Nissan Primera (2002-2008 / MK 3) To reset the service light on a Nissan Primera, get in the vehicle and turn on the instrument panel without starting the engine. Use the buttons on t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos