Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Mirror on a Nissan Rogue S35

Model: Nissan Rogue S35 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Side mirror

See other generations:
Video tutorial

This guide shows how to replace the outside mirror on a Nissan Rogue S35. The first step is to remove the 10 mm bolt located in the handle recess and the two screws under the handle trim. Disconnect the door's retaining clips and remove the door.

Remove the trim piece in the corner of the door and disconnect the electrical connector for the mirror control. Unscrew the mirror mounting bolts and hold the mirror to avoid damaging the body.

Install the new mirror and reassemble everything in position. Check the electric mirror control.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Replace the Outside Mirror on a Nissan Rogue
How to Replace the Outside Mirror on a Nissan Rogue
Nissan Rogue (2008-2015 / S35) To replace the outside mirror on a Nissan Rogue, remove the door panel. First, unscrew the screws located at the internal handle and under the trim a…
How to replace the interior rearview mirror of the Nissan Rogue
How to replace the interior rearview mirror of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Shortly we will see the instructions that will allow us to disassemble and replace the interior rearview mirror of the Nissan Rogue, but also of the …
Fuses Location for the Nissan Rogue S35
Fuses Location for the Nissan Rogue S35
Nissan Rogue (2008-2015 / S35) Let's look at the location of the fuse boxes for the Nissan Rogue: In the engine compartment, there are two boxes located between the battery and the…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos