Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove or Disassemble the Driver's Door Handle on a Nissan Rogue

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Handle

See other generations:
Video tutorial

In this video, you will see how to remove the outer door handle of the driver's side on a Nissan Rogue. Open the door and remove the rubber plug located at the level of the handle; inside, there is a screw that you need to remove to take off the handle.

You will need a star screwdriver, and to ensure that the screw doesn't fall inside the door, the YouTuber uses a small piece of cardboard. Once the screw is removed, you can pull out the part with the lock, and the handle will split in two, allowing you to take it off the vehicle for repair or complete replacement.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Remove the Driver's Door Panel on a Nissan Rogue?
How to Remove the Driver's Door Panel on a Nissan Rogue?
Nissan Rogue (2014-2020 / T32) In this tutorial, you will see how to remove the driver's door panel on a Nissan Rogue, a very simple and quick task. First, open the door in questio…
How to disassemble and replace the outer handle of the front door of the Nissan Rogue
How to disassemble and replace the outer handle of the front door of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Today's steps will show us how to disassemble and replace the exterior door handle of the front door of the Nissan Rogue, as well as the Qashqai. Fir…
Disassembly of the front door panel of the Nissan Rogue
Disassembly of the front door panel of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the instructions that will allow us to disassemble and remove the front door panel of the Nissan Rogue. First, we open the front do…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos