Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Nissan Rogue

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Door trim panel

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and remove the front door panel of the Nissan Rogue. First, we open the front door of the vehicle and start by removing the plastic cover of the door handle; then we unscrew all the fixing screws that we find underneath and on the sides of the panel, as shown in the video.

At this point, we disconnect the electrical connector of the window switch panel, levering on the sides of the panel to detach and remove it; finally, we disconnect the handle cable, reassembling the door panel last!


Posted on 23 September 2025 by ScegliAuto


Related tutorials

Removing the Door Panel from the Nissan Rogue 1
Removing the Door Panel from the Nissan Rogue 1
Nissan Rogue (2008-2015 / S35) In this video tutorial, see how to remove and replace the front door panel of the first-generation Nissan Rogue by following the instructions below. …
How to disassemble and replace the outer handle of the front door of the Nissan Rogue
How to disassemble and replace the outer handle of the front door of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Today's steps will show us how to disassemble and replace the exterior door handle of the front door of the Nissan Rogue, as well as the Qashqai. Fir…
How to remove the door panel of the Nissan Rogue
How to remove the door panel of the Nissan Rogue
Nissan Rogue (2021-2026 / T33) In the following guide, you will find the description of all the various steps you need to take if you want to disassemble the front door panel of yo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos