Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Driver's Door Panel on a Nissan Rogue?

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will see how to remove the driver's door panel on a Nissan Rogue, a very simple and quick task. First, open the door in question.

Then, using a plastic trim tool to avoid leaving marks, pry off both the indicated trim and the handle cover. Next, disconnect the connector, remove the three indicated screws, and proceed to take off the window switch panel.

At this point, all that’s left is to remove the last screw, separate the panel from the door, and install the replacement by following the reverse procedure.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to remove the door panel of the Nissan Rogue
How to remove the door panel of the Nissan Rogue
Nissan Rogue (2021-2026 / T33) In the following guide, you will find the description of all the various steps you need to take if you want to disassemble the front door panel of yo…
How to Remove or Disassemble the Driver's Door Handle on a Nissan Rogue
How to Remove or Disassemble the Driver's Door Handle on a Nissan Rogue
Nissan Rogue (2014-2020 / T32) In this video, you will see how to remove the outer door handle of the driver's side on a Nissan Rogue. Open the door and remove the rubber plug loca…
Disassembly of the front door panel of the Nissan Rogue
Disassembly of the front door panel of the Nissan Rogue
Nissan Rogue (2014-2020 / T32) Below we will see the instructions that will allow us to disassemble and remove the front door panel of the Nissan Rogue. First, we open the front do…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos