Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2010 Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Service warning light

To reset the service maintenance light on the vehicle, follow these steps: enter the cabin and sit in the driver's seat, turn on the ignition (do not start the engine), locate the two buttons at the bottom centre of the instrument panel. Press and hold the right button near the odometer until the display starts flashing, then release the button and press it again immediately for one second. At this point, the service light will have been reset. To complete the service reset, turn off and then turn on the ignition.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Nissan Qashqai 2018
How to reset the service light on the Nissan Qashqai 2018
Nissan Qashqai (2014-2022 / J11) To manually reset the service light of your 2018 Nissan Qashqai, you simply need to follow the steps described in the following guide. First of all, …
How to reset the Service light on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To reset the Service light on a Nissan Qashqai, turn on the ignition and navigate through the menu using the directional controls on the left side of…
How to Reset the Service Light on a Nissan Qashqai
How to Reset the Service Light on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) To reset the Service light on a Nissan Qashqai, turn on the instrument panel and navigate through the menu on the display using the lever on the left…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos