Do it yourself
Frequently asked questions about cars and motorcycles

Fuse Diagram for the Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fuse box

See other generations:
Video tutorial

This car model has two fuse boxes; the first is located in the engine compartment on the left side next to the battery, while the second is in the cabin on the left side under the dashboard near the driver's door. The fuse box inside the cabin contains fuses for the heated seats, electronic control unit, heated exterior mirrors, power socket, audio and multimedia system, air conditioning, front and rear wipers, cabin lights, and front headlights.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) In the video tutorial below this article, the fuse diagram of the Nissan Qashqai is shown. This diagram is useful in case of electrical or electronic…
Nissan Qashqai (2014-2022 / J11) The information provided in this guide will allow us to access the fuse boxes of the Nissan Qashqai, including the diagram and layout. First, get int…
Nissan Qashqai (2014-2022 / J11) The fuse diagram for the 2014 Nissan Qashqai is a true guide that makes our life easier, as it allows you to easily find a specific fuse in the fuse …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2006-2014 - Where is the windshield washer pump fuse located in the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - Where is the Nissan Qashqai horn fuse located? Read answer

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos