Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter in a Nissan Rogue?

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter is necessary after a certain period because it tends to accumulate impurities present in the air it filters. The replacement is simple and should be done about once a year.

Just remove the filter cover located at the bottom left on the passenger side. Once done, you can pull out the old filter and insert the new one, then reinsert the cover.

Some people wash the old filter instead of buying a new one: this is not recommended due to the low cost of the cabin air filter.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Nissan Rogue?
How to Replace the Cabin Filter on a Nissan Rogue?
Nissan Rogue (2014-2020 / T32) To replace the cabin filter on a Nissan Rogue, access the area located just below the glove compartment and at the back of the center console. Here, …
How to Replace the Cabin Filter in a Nissan Rogue?
How to Replace the Cabin Filter in a Nissan Rogue?
Nissan Rogue (2008-2015 / S35) In this video, see how to replace the cabin filter in a Nissan Rogue, a very simple and quick operation. The filter is located on the left side of th…
How to Replace the Cabin Filter in a Nissan Rogue?
How to Replace the Cabin Filter in a Nissan Rogue?
Nissan Rogue (2008-2015 / S35) To replace the cabin filter in a Nissan Rogue, loosen the screws securing the right side panel of the driver’s footwell. By removing this panel, you …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos