Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Trim of the Boot Lid on the Nissan Micra

Model: Nissan Micra K13 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

This guide shows how to remove the interior trim or panel of the rear boot lid on the Nissan Micra in simple and quick steps. First, open the rear boot lid and start removing the plastic clips from the trim; then pry at the sides to detach it from the boot lid, as illustrated in the video.

At this point, you will have access to the boot lid lock; carry out any necessary repairs and finally reassemble the trim by applying the reverse procedure of disassembly!


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Nissan Micra
Removing the Radio from a Nissan Micra
Nissan Micra (2002-2010 / K12) In this video, you will learn how to remove the radio from a Nissan Micra. The removal process does not require special technical knowledge, so let’s…
How to Open the Boot of the Nissan Micra from the Inside
How to Open the Boot of the Nissan Micra from the Inside
Nissan Micra (2002-2010 / K12) This guide provides instructions to open the boot of the Nissan Micra in case of an emergency or if the button or lock is broken. First, open the rea…
How to Replace the Rear Lights in a Nissan Micra?
How to Replace the Rear Lights in a Nissan Micra?
Nissan Micra (2002-2010 / K12) This tutorial shows how to replace the rear lights in a Nissan Micra, a very simple and quick operation. First, ensure that the key is not inserted f…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos