Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan on a Nissan Navara

Model: Nissan Navara D40 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Blower motor

See other generations:
Video tutorial

To remove the cabin fan on a Nissan Navara, open the glove compartment located on the passenger side to loosen all the screws inside. Once these are removed, you can pull out the entire glove compartment, giving access to the components at the back.

Here, you will find the fan, located directly under the cabin filter, which can be removed by disconnecting its connectors and loosening the fixing bolts. After removing the old fan, you can install a new one and reassemble the glove compartment.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Nissan Navara
How to Remove the Rear Light of a Nissan Navara
Nissan Navara (2005-2015 / D40) Before you begin, open the tailgate of the load area of your Nissan Navara. Start by unscrewing and removing the screws that secure the rear light to…
How to Replace the Cabin Filter on the Nissan Navara
How to Replace the Cabin Filter on the Nissan Navara
Nissan Navara (2005-2015 / D40) To replace the cabin filter on the Nissan Navara, open the glove compartment located on the passenger side. This will allow you to detach the pins in…
Where to Find the OBD Port of the Nissan Navara 2
Where to Find the OBD Port of the Nissan Navara 2
Nissan Navara (2005-2015 / D40) If you own a Nissan Navara Mk2 (2005-2015) and want to find out where the OBD port is located, simply follow these steps. First, park the car safely …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos