Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the ECU of the Nissan Navara

Model: Nissan Navara D40 - Years 2005-2015
Part: Warning light – error code

This guide explains the procedure to reset the engine control unit (ECU) of the Nissan Navara, following the instructions below. First, get into the vehicle and turn on the ignition; then press the accelerator pedal five times, waiting another ten seconds before pressing the accelerator again for another ten seconds, as shown in the video. At this point, you will see the engine light start to flash, completing the ECU reset procedure. Then turn off the ignition and start the engine!

Updated on 15 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the ECU of the Nissan Navara D40
How to Reset the ECU of the Nissan Navara D40
Nissan Navara (2005-2015 / D40) .. This video shows how to reset the ECU of the Nissan Navara D40. To reset the ECU, start the ignition by turning the key.. …
Where to Find the OBD Port of the Nissan Navara 2
Where to Find the OBD Port of the Nissan Navara 2
Nissan Navara (2005-2015 / D40) If you own a Nissan Navara Mk2 (2005-2015) and want to find out where the OBD port is located, simply follow these steps. First, park the car safely …
How to Remove the Rear Light of a Nissan Navara
How to Remove the Rear Light of a Nissan Navara
Nissan Navara (2005-2015 / D40) Before you begin, open the tailgate of the load area of your Nissan Navara. Start by unscrewing and removing the screws that secure the rear light to…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos