Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Nissan Navara's control unit?

Model: Nissan Navara D40 - Years 2005-2015
Part: Warning light – error code

To perform the reset of the Nissan Navara's control unit, you need to turn on the instrument panel by inserting the ignition key into the appropriate slot: after turning it on, you will need to press the accelerator pedal five times. Now you will need to release it and after a few seconds you will need to hold down the same pedal for about five seconds: in this way you will notice that the instrument panel will start flashing and you can turn it off when it stops. Upon restarting the panel, you will be able to verify that the control unit has been reset.

Posted on 19 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Nissan Navara
How to Remove the Rear Light of a Nissan Navara
Nissan Navara (2005-2015 / D40) Before you begin, open the tailgate of the load area of your Nissan Navara. Start by unscrewing and removing the screws that secure the rear light to…
How to reset the service indicator light on a Nissan Navara
How to reset the service indicator light on a Nissan Navara
Nissan Navara (2014-2024 / D23) In this video, we will see how to reset the service light of a Nissan Navara D23: first of all, we need to check that the doors and the front hood ar…
Where to Find the Fuses on a Nissan Navara?
Where to Find the Fuses on a Nissan Navara?
Nissan Navara (1997-2004 / D22) Each fuse in the Nissan Navara is located within one of the specific fuse boxes installed in the vehicle. This type of car has two fuse boxes for con…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos