Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Navara
    4. : How to reset the service on Nissan Navara

Nissan Navara - Video tutorial

Model: Nissan Navara D23 - Years 2014-2023
Part: Instrument cluster
Operation: How to reset the service on Nissan Navara

To reset the service on the Nissan Navara, after having actually performed the required services, we must get on the vehicle, close the doors and turn on the ignition, without starting the engine. We have to press and hold the button that is present on the right side of the speedometer: it will start flashing and then it will display the missing mileage at the next service. Don't worry, you won't see it between now and the next coupon. Turn off the ignition and then turn it back on. Now the warning light and the service notice are off and you can travel peacefully until the next service.


Posted on 2 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Navara 2014-2023 - How to reset the Adblue warning light on Nissan Navara? Read Answer
    • Navara 2014-2023 - What are the problems with the Nissan Navara instrument cluster? Read Answer
    • Navara 2005-2015 - What problems have been found on the Nissan Navara instrument cluster? Read Answer
    • Navara 2014-2023 - How to reset the service light on the Nissan Navara? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos