Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service of the Nissan Navara.

Model: Nissan Navara D23 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

On the 2017 Nissan Navara, the service reset is performed with the ignition in the ON position and the engine off. With the instrument cluster display active, use the normal command navigation to reach the maintenance/service section. Here, select the reset interval function and proceed to confirm when prompted by the system.

Once completed, the mileage/time counters are reset, and the warning will no longer be displayed on the main screen. To verify, return to the same section of the onboard computer and check that the interval is updated according to the new maintenance cycle.


Posted on 3 December 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Nissan Navara NP300
How to Reset the Service Light on a Nissan Navara NP300
Nissan Navara (2014-2024 / D23) Due to a minor electronic error, it may happen that the service light on your Nissan Navara NP300 does not turn off even after correctly performing t…
How to reset the service light on the Nissan Navara NP300
How to reset the service light on the Nissan Navara NP300
Nissan Navara (2014-2024 / D23) If the service light on the instrument panel of your Nissan Navara NP300 continues to come on despite having recently had the car serviced, it means …
Resetting the Service Light on a Nissan Navara
Resetting the Service Light on a Nissan Navara
Nissan Navara (2005-2015 / D40) When it's time for a service on the Nissan Navara V6, a warning appears on the dashboard reminding you to perform this maintenance. Once the necessar…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos