Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J11
- Years 2014-2022 The procedure necessary to be able to manually reset the service warning light on your 2020 Nissan Qashqai independently is quite simple and you will be able to complete it in a few seconds thanks to the following indications. First, go inside the car and make sure it is completely turned off. Then press the button located just below the speedometer several times and enter the on-board computer settings. Now hold down the same button until the new menu appears. Scroll down and select the "Maintenance" option first and then "Service". Finally, select "Reset" and proceed with the reset.
Posted on 27 May 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |