Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Maintenance of the Sunroof Drains on a Nissan X-Trail MK2

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, you will see how to clean the drains of a sunroof on a Nissan X-Trail. As shown in the video, the drain tubes run from the front roof pillars and discharge underneath the driver and front passenger footwells.

You need to remove the pillar covers and follow the tubes to where they lead, underneath the footwells, and check if they are blocked. Clean them thoroughly, as they will almost certainly be clogged with mud and dust.

Once they are clean, you can refit them and reattach the pillar covers you removed earlier.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service on a Nissan X-Trail MK2
How to Reset the Service on a Nissan X-Trail MK2
Nissan X Trail (2007-2014 / MK 2, T31) .. learn how to reset the service on a Nissan X-Trail MK2: close all the doors and turn on the instrument panel, then press and hold the button located.. …
How to Reset the Service on a Nissan X-Trail T32
How to Reset the Service on a Nissan X-Trail T32
Nissan X Trail (2014-2023 / MK 3, T32) In this video, you can see how to reset the service on a Nissan X-Trail T32: first, turn on the ignition without starting the engine, then navigate t…
How to install the roof racks on the Nissan X-Trail?
How to install the roof racks on the Nissan X-Trail?
Nissan X Trail (2014-2023 / MK 3, T32) In this tutorial we can see how to mount the roof bars on the Nissan X-Trail, an extremely simple and fast operation. First of all, we position ourse…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos