Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : How to replace the cabin filter on Nissan Micra.

Nissan Micra - Video tutorial

Model: Nissan Micra K13 - Years 2010-2017
Part: Cabin air filter
Operation: How to replace the cabin filter on Nissan Micra.

In this video tutorial we can see how it is possible to replace the cabin filter on a Nissan Micra, following a few simple steps that will guide us towards proper vehicle management. The cabin filter on this car can be found behind the glove compartment, so we need to open the glove compartment, remove all the material inside, and with a star screwdriver, unscrew the fastening screws of the glove compartment. Once all the screws are removed, the compartment can be removed from its seat. Now we remove the filter from its seat. We position the new filter following the arrows on the filter itself according to the airflow.


Posted on 16 May 2023 by ScegliAuto



Nissan Micra Cabin Air Filter Replacement
Nissan Micra (2002-2010 / K12) In today's video tutorial we will see how to remove and replace the cabin filter of a Nissan Micra second series. First we go inside the car, on the
How to replace the cabin air filter in Nissan Micra
Nissan Micra (2017-2024 / K14) In today's video we see how to perform a very simple maintenance operation on the Nissan Micra currently on the market. Specifically we will see how
How to replace the cabin filter on a Nissan Micra.
Nissan Micra (2002-2010 / K12) We can see through this very short video tutorial all the necessary steps to replace the cabin air filter on a Nissan Micra k12, a model produced fro

    Frequently Asked Questions

    • Micra 2017-2024 - Where is the cabin filter located on Nissan Micra K14? Read Answer
    • Micra 2010-2017 - How to replace the cabin filter on Nissan Micra K13? Read Answer
    • Micra 1992-2002 - Where is Nissan Micra k11 air conditioning filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos