Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Rear Windscreen Wiper Blade

Model: Nissan Micra K12 - Years 2002-2010
Part: Windshield wipers

Replacing the rear windscreen wiper blade is extremely simple: check the length and type of attachment first. Then, lift the wiper arm and detach the old blade by pulling it outward. Align the fixing pin on the wiper arm with the corresponding slot on the new blade and press until it clicks into place. This is a very easy replacement, and it is advisable to take the opportunity to also check the condition of the front wipers and the level of the washer fluid in the reservoir.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wiper Blade
How to Replace the Front Wiper Blade
Nissan Micra (2002-2010 / K12) Lift the wiper arm away from its position on the windscreen. Rotate the wiper blade locking lever to release it from its position. Move the blade dow…
How to Replace the Front Wiper Blades on the Nissan Micra
How to Replace the Front Wiper Blades on the Nissan Micra
Nissan Micra (2002-2010 / K12) If you need to replace the front wiper blades on your vehicle, follow the simple instructions provided below and refer to the images in the video. Li…
How to Replace Wiper Blades on a Nissan Micra
How to Replace Wiper Blades on a Nissan Micra
Nissan Micra (2002-2010 / K12) To replace the wiper blades on a Nissan Micra, lift the wiper arms away from the windscreen to the service position. Locate the wiper blade attachmen…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos