Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Wiper Blade for Nissan Micra

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

See other generations:
Video tutorial

Below are the main steps to remove and replace the rear wiper blade of the Nissan Micra. First, move to the rear of the vehicle and begin to lift the wiper arm. Then, rotate and unclip the wiper blade from the arm to remove it, as shown in the video.

At this point, install the new rear wiper blade, securing it properly. Lower the wiper arm, applying the same procedure to replace the front wiper blades!


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wiper Blade on a Nissan Micra K13
How to Replace the Rear Wiper Blade on a Nissan Micra K13
Nissan Micra (2010-2017 / K13) In this short video, you will see how to change the rear wiper blade on a Nissan Micra K13, third generation, in simple and quick steps. First, lift …
How to Replace the Rear Wiper on a Nissan Micra?
How to Replace the Rear Wiper on a Nissan Micra?
Nissan Micra (2002-2010 / K12) In this tutorial, you will see how to replace the rear wiper on a Nissan Micra K12, an extremely simple and quick operation. First, ensure the wiper …
How to replace the front wipers on a Nissan Micra
How to replace the front wipers on a Nissan Micra
Nissan Micra (2010-2017 / K13) Today, we will see the guide that allows you to remove and replace the front wipers (this also applies to the rear) on the Nissan Micra. First, move …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos