Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010
Part: Cabin air filter

This brief video tutorial shows all the steps necessary to replace the cabin air filter on a Nissan Micra K12, produced from 2002 to 2010. The filter is located at the bottom of the central tunnel in the cabin. To access it, first remove the glove compartment on the passenger side, then use a screwdriver to remove all five screws from the glove compartment door and the drawer as clearly shown in the video. Once done, you can extract the old cabin filter, replace it, and reassemble everything.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter in a Nissan Micra
Replacing the Cabin Air Filter in a Nissan Micra
Nissan Micra (2002-2010 / K12) In today's video tutorial, you will see how to remove and replace the cabin air filter in a second-generation Nissan Micra. First, get inside the car…
Where is the cabin filter located in the Nissan Micra?
Where is the cabin filter located in the Nissan Micra?
Nissan Micra (2002-2010 / K12) In this video, you can see where the cabin filter is located in the Nissan Micra and how to proceed if you need to replace it, a very simple and quic…
How to replace the cabin filter on a Nissan Micra.
How to replace the cabin filter on a Nissan Micra.
Nissan Micra (2010-2017 / K13) .. In this video tutorial, you can see how to replace the cabin filter on a Nissan Micra by following a few simple steps for proper vehicle.. …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos