Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Nissan
  4. :
  5. Micra
  6. : Nissan Micra Cabin Air Filter Replacement

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Cabin air filter
Operation: Nissan Micra Cabin Air Filter Replacement

In today's video tutorial we will see how to remove and replace the cabin filter of a Nissan Micra second series. First we go inside the car, on the passenger side, and start by removing the cover of our air filter, going to pull from the tab that we find at the bottom: then we extract the old filter and replace it with the new one. To reassemble the new filter it is necessary to insert it in the correct direction which is usually indicated with arrows printed on the filter. Then put the lid back on; follow the video to the end for replacing the other filter!


Posted on 24 December 2023 by ScegliAuto



How to replace the cabin air filter in Nissan Micra
Nissan Micra (2017-2024 / K14) In today's video we see how to perform a very simple maintenance operation on the Nissan Micra currently on the market. Specifically we will see how
Nissan Micra Cabin Air Filter Replacement
Nissan Micra (2002-2010 / K12) .. Nissan Micra Cabin Air Filter Replacement? To remove the filter, the glovebox must be removed. We open..
How to change air filter on Nissan Micra
Nissan Micra (1992-2002 / K11) Let's see the replacement of the air filter of a Nissan Micra. To replace the Micra's air filter we have to lift the front hood where it is positione

    Frequently Asked Questions

    • Micra 2017-2024 - Where is the cabin filter located on Nissan Micra K14? Read Answer
    • Micra 2010-2017 - How to replace the cabin filter on Nissan Micra K13? Read Answer
    • Micra 1992-2002 - Where is Nissan Micra k11 air conditioning filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos