Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a 2020 Nissan NV200

Model: Nissan Nv200 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Timing belt

This video is currently unavailable

After years of use, the timing belt can wear out, necessitating a replacement. Today, this video tutorial will explain how to replace the timing belt on a 2020 Nissan NV200. Start the replacement by removing the right front wheel and lifting the vehicle.

Next, unscrew the bolts securing the bracket, and once removed, unscrew the fuel bracket. Proceed by loosening the pulley using a 16 mm spanner and remove the belt.

Return the tensioner pulley to its original position and install the new belt, pulling it slowly. Finally, reconnect the pulley to its original position, install the fuel bracket, and tighten the bracket and bolts.

Refit the wheel.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the Nissan NV200
Where to Find the OBD Port of the Nissan NV200
Nissan Nv200 (2009-2024 / MK 1) To locate the OBD port inside your Nissan NV200, carefully follow these simple instructions. First, park your Nissan NV200 safely and ensure it is co…
Resetting the Service Light on the Nissan NV200
Resetting the Service Light on the Nissan NV200
Nissan Nv200 (2009-2024 / MK 1) Follow these simple steps to reset the service light for the regular maintenance oil change on the Nissan NV200. First, get into the vehicle and turn…
How to replace the air filter in a Nissan NV200 van?
How to replace the air filter in a Nissan NV200 van?
Nissan Nv200 (2009-2024 / MK 1) In this tutorial, we can see how to replace the air filter in a Nissan NV200 van, a very simple and quick operation. First, ensure that the engine is…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos