Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

After performing routine maintenance on the Nissan Qashqai, you need to reset the Service light on the dashboard. Sit in the driver's seat and turn on the ignition.

Using the lever located at the bottom left of the speedometer, select the "Settings" menu, confirm, and in the next screen, rotate the lever to select "Maintenance" and press to confirm. In the next screen, select "Service" by pressing again, then press to exit.

In the subsequent screen, select "Other" and choose "Reset", then press the lever. Finally, navigate back through the menus until you return to the initial screen.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on the Nissan Qashqai
Resetting the Service Light on the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) After completing routine maintenance, proceed to reset the Service light on the Nissan Qashqai. Sit in the driver's seat and, with the ignition off, …
What is the Procedure to Reset the Service Light on the 2018 Nissan Qashqai?
What is the Procedure to Reset the Service Light on the 2018 Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) Proceed with resetting the service light on the 2018 Nissan Qashqai, supported by the tutorial video provided, all DIY, quickly and easily. After tur…
Resetting the Service Light on a Nissan Qashqai
Resetting the Service Light on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) The following steps will show you how to reset the service light for the routine maintenance oil change on a Nissan Qashqai. First, get into the vehi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos