Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Clutch Cable on the Nissan Micra

Model: Nissan Micra K11 - Years 1992-2002

Below are the steps to remove and replace the clutch cable on the Nissan Micra. First, open the bonnet of your car and locate the clutch cable, which can be found at the bottom of the engine bay. Next, unscrew the clutch cable bolt, removing it along with its sheath, as shown in the video. At this point, install the new clutch cable, tightening it and making the necessary adjustments; ensure it operates correctly with the pedal, making further adjustments if needed.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the antenna and its base of the Nissan Micra
How to replace the antenna and its base of the Nissan Micra
Nissan Micra (2002-2010 / K12) Today we discover the process of disassembly and replacement of the antenna and its base of the Nissan Micra, in simple steps. First of all, we get o…
Removing the Door Panel from the Nissan Micra K12
Removing the Door Panel from the Nissan Micra K12
Nissan Micra (2002-2010 / K12) In today's video, see the steps to remove the front door panel from the Nissan Micra K12. First, open the front door and start by removing the plasti…
Disassembly of the handbrake lever of the Nissan Micra
Disassembly of the handbrake lever of the Nissan Micra
Nissan Micra (2002-2010 / K12) In this guide we will see the instructions that will allow us to disassemble and replace the handbrake lever of the Nissan Micra. First of all, we ge…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos