Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the handbrake lever of the Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010
Part: Parking brake

In this guide we will see the instructions that will allow us to disassemble and replace the handbrake lever of the Nissan Micra. First of all, we get on board the cabin and start removing the rear plastic cover of the central tunnel, unscrewing the fixing screws; we remove the gear knob and unscrew the screws of the handbrake lever that we find at the base, using a socket wrench. At this point we disconnect the handbrake cable from the register, then remove the lever; we repair or replace it, reassembling the lever and the central tunnel.

Posted on 28 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on a Nissan Micra
How to Adjust the Handbrake on a Nissan Micra
Nissan Micra (1992-2002 / K11) Is the handbrake on your car loose when you pull it? Learn how to adjust the handbrake on a Nissan Micra. To start: pull the handbrake fully upwards …
Removing the Door Panel on a Nissan Micra
Removing the Door Panel on a Nissan Micra
Nissan Micra (1992-2002 / K11) How to remove the door panel located on a Nissan Micra? Here’s how to proceed. Use a lever to remove the plastic cover of the internal handle; detach…
Removing the Radio from a Nissan Micra
Removing the Radio from a Nissan Micra
Nissan Micra (2002-2010 / K12) In this video, you will learn how to remove the radio from a Nissan Micra. The removal process does not require special technical knowledge, so let’s…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos