Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service on a Nissan Qashqai J11

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Warning light – error code

See other generations:
Video tutorial

In this video, you will see how to reset the service on a Nissan Qashqai J11: with the ignition on, operate the buttons located on the left side of the steering wheel. The "enter" button can be pressed up or down.

In this case, press it upwards until you find the settings on the screen. Scroll down the submenu until you find the "maintenance service". Here you will find the "service". When you enter the reset page, it will ask if you want to proceed.

Naturally, respond with yes by pressing the "enter" button again, and the operation is complete. Go back, and the operation is done.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) In this brief tutorial, you will see the entire procedure necessary to perform the service reset on a Nissan Qashqai, model J11, produced from 2014 t…
Nissan Qashqai (2014-2022 / J11) To manually reset the service indicator light on your Nissan Qashqai J11 (2016), you need to carefully read the following guide and follow the steps …
Nissan Qashqai (2014-2022 / J11) This guide shows how to reset the service light on a Nissan Qashqai J11: turn on the ignition and use the arrow button to scroll until you find "Sett…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - What does it mean when the "chassis control system error" indication lights up on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - What does the yellow brake warning light on the Nissan Qashqai mean? Read answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai handbrake warning light flashing? Read answer
    • Qashqai 2014-2022 - What does the red engine light on the Nissan Qashqai mean? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos