Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Start&Stop System on the Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Warning light – error code

See other generations:
Video tutorial

Today's instructions will show you how to perform a general reset of the Start&Stop system and the ECU on the Nissan Qashqai. First, open the bonnet of the vehicle and start disconnecting the battery by removing both terminals (positive and negative).

Since the Start&Stop system also depends on the proper functioning of the battery, it is essential that it is in good condition (check the charge level). Now reconnect the battery and check the operation of the Start&Stop system while driving, following the video tutorial to the end!


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Nissan Qashqai (2014-2022 / J11) To deactivate the Start&Stop system on the Nissan Qashqai, loosen the screws securing the control panel located at the bottom left of the steering co…
Nissan Qashqai (2014-2022 / J11) Today's guide will show you the steps to temporarily disable the Start&Stop system of the Nissan Qashqai. First, get in the vehicle and start the eng…
Nissan Qashqai (2014-2022 / J11) Today we will explain how to permanently deactivate the Start&Stop system of the Nissan Qashqai model J11. To deactivate the system permanently, we n…

    Frequently Asked Questions

    • Qashqai 2014-2022 - What does it mean when the "chassis control system error" indication lights up on the Nissan Qashqai? Read answer
    • Qashqai 2014-2022 - What does the yellow brake warning light on the Nissan Qashqai mean? Read answer
    • Qashqai 2014-2022 - Why is the Nissan Qashqai handbrake warning light flashing? Read answer
    • Qashqai 2014-2022 - What does the red engine light on the Nissan Qashqai mean? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos