Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Battery of the Nissan Qashqai J11

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Key

If the remote that opens and closes the doors of the Nissan Qashqai J11 no longer works, it may be due to a depleted battery. To replace it, turn the remote over, press the button in the centre to unlock the emergency key, and use a small screwdriver to pry along the edge to separate the two halves. In the rear half, you will find the battery compartment; remove it using the screwdriver and replace it with a new CR2032, ensuring it is inserted the correct way. Reassemble the two halves, press until they click together, and insert the key.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on the Nissan Qashqai J11
Replacing the Starter Motor on the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) In this video, you will see the procedure necessary for removing and replacing the starter motor on the Nissan Qashqai J11, second series. First, ope…
How to replace the gear knob of the Nissan Qashqai J11
How to replace the gear knob of the Nissan Qashqai J11
Nissan Qashqai (2014-2022 / J11) The steps to follow to complete the replacement of the gear knob of your Nissan Qashqai J11 are really very simple and you just need to read the foll…
Where is the OBD port of the Nissan Qashqai J11?
Nissan Qashqai (2014-2022 / J11) Below, discover where the OBD port of your Nissan Qashqai J11 (2014-2022) is located. This port allows you to connect any compatible diagnostic tool …

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - Why does the Nissan Qashqai key not work? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos