Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fan Pulley Replacement

Model: Nissan Pathfinder MK 3, R51 - Years 2005-2012
Part: Clutch

Open and lift the bonnet. Now proceed to remove the panel covering the engine to access the lower part. To do this, you will also need to remove the large fan located behind the radiator. Next, remove the yellow fan, which often causes noise and vibrations. Then, remove the belt and pulleys from the belt circuit, allowing you to extract the base of the fan that was causing the noise and vibrations. Replace the affected parts and retrace the steps described above in reverse for reassembly.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Courtesy Light Bulb in the Nissan Pathfinder Door
Replacing the Courtesy Light Bulb in the Nissan Pathfinder Door
Nissan Pathfinder (2005-2012 / MK 3, R51) Here are brief instructions on how to remove and replace the courtesy light bulb located at the bottom of the door panel in the Nissan Pathfinder. Fi…
Differential Oil Replacement on Nissan Pathfinder
Differential Oil Replacement on Nissan Pathfinder
Nissan Pathfinder (2005-2012 / MK 3, R51) Replacing the oil in the differential of the Pathfinder? Let's see how to do the replacement. Position your car on a column lift and raise it to a co…
Replacing the Wishbones
Replacing the Wishbones
Nissan Pathfinder (1996-2004 / MK 1, R50) Remove the relevant wheel and then locate the position of the wishbones. Identify where they are secured and spray some lubricant or rust remover to …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos