Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Cabin air filter

The cabin air filter of the Nissan Qashqai model J10 is located inside the vehicle's cabin, specifically on the left side next to the pedal area. To open the filter cover for replacement, you will need to unscrew the side part of the carpet and then the filter cover. If there is not enough space, you can remove the accelerator pedal. Once the cover is removed, you can extract the filter and insert the new one. Immediately after closing the cover, you should turn on the ignition and start the vehicle to ensure that the filter is working properly.

Posted on 24 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Nissan Qashqai?
How to Replace the Cabin Air Filter on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) Before starting, enter the cabin of your Nissan Qashqai. Begin by unclipping and removing the cover located at the lower left of the centre tunnel ne…
How to replace the cabin air filter of the 2012 Nissan Qashqai
How to replace the cabin air filter of the 2012 Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Replacing the cabin air filter on a 2012 Nissan Qashqai is an operation that follows simple steps. The first step is to open the driver's side door. …
How to Replace the Cabin Air Filter on a 2014 Nissan Qashqai
How to Replace the Cabin Air Filter on a 2014 Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Before starting the replacement of the pollen cabin air filter, position the Nissan Qashqai on a flat surface or on a ramp for stable and safe workin…

Other guides you may be interested in

    Frequently Asked Questions

    • Qashqai 2014-2022 - What is the location of the pollen filter on the Nissan Qashqai? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos