Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the 2016 Nissan X Trail located?

Model: Nissan X Trail T32, MK 3 - Years 2014-2023
Part: Dashboard

In the following guide addressed to all of you who own a 2016 Nissan X Trail, we will discover where the OBD port is located, through which you can connect a diagnostic tool compatible with your car. First of all, open the door on the driver's side and enter the interior of the cabin, then make sure the dashboard is turned off and bend down to reach the lower area of the dashboard. At this point, locate the OBD port you were looking for and you have finished. To connect the diagnostic tool to it, all you need is a specific cable.

Posted on 3 July 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Resetting the Engine Control Unit of the Nissan X-Trail
Resetting the Engine Control Unit of the Nissan X-Trail
Nissan X Trail (2001-2006 / MK 1, T30) This guide provides instructions to reset the ECU of the Nissan X-Trail. First, get into the vehicle and turn on the instrument panel; then press the…
How to Reset the Service Light on a 2016 Nissan X Trail?
How to Reset the Service Light on a 2016 Nissan X Trail?
Nissan X Trail (2014-2023 / T32, MK 3) Let’s see how to reset the service light on a 2016 Nissan X Trail with a simple and quick procedure that does not require the use of the OBD port or …
Where is the fuse box of the Nissan X Trail T30 located?
Where is the fuse box of the Nissan X Trail T30 located?
Nissan X Trail (2001-2006 / MK 1, T30) In this new guide dedicated to all of you who own a Nissan X Trail T30, we will describe the various steps you need to take to locate the fuse box of…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos