Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Nissan Qashqai?

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

To remove the rear light of the Nissan Qashqai, open the tailgate: this will allow you to access the screws next to the corresponding light unit. These screws must be loosened so that you can extract the light unit from its housing, disconnecting the connector located inside; once the light unit has been removed, connect the new one to the corresponding connector so that it can be inserted back into its housing.

This should be secured with the appropriate screws, then close the tailgate.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Headlight on a Nissan Qashqai
How to Remove the Rear Headlight on a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Here’s how to remove the rear headlight on a Nissan Qashqai (left side). First, open the rear hatch of the car, then unscrew the screws on the plasti…
How do you remove the rear light of the Nissan Qashqai?
How do you remove the rear light of the Nissan Qashqai?
Nissan Qashqai (2021-2026 / J12) It will be possible to remove the rear light of the Nissan Qashqai by opening the rear hatch, so that access to the panel located next to the corresp…
How to Replace the Rear Outer Light on a Nissan Qashqai
How to Replace the Rear Outer Light on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) To replace the rear outer light on a Nissan Qashqai, start by opening the tailgate. Undo the two screws near the light using a 10mm socket; once the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos