Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Outer Light on a Nissan Qashqai

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Tail light

To replace the rear outer light on a Nissan Qashqai, start by opening the tailgate. Undo the two screws near the light using a 10mm socket; once the screws are removed, carefully extract the light, being mindful of the clips, and disconnect the electrical connector. After removing the old light, take the new light out of the packaging, remove the bulb holder from the old light by unscrewing the nuts, and install it on the new light. Once the bulb holder is fitted to the new light, spray some contact cleaner on the connector, clean it, reconnect it, and then screw in the two screws for the light.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the rear headlight bulbs of the Nissan Qashqai
Guide to disassembling the rear headlight bulbs of the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today we will see the instructions that will allow us to disassemble and replace the rear light and its bulbs of the Nissan Qashqai. First of all, we…
How to replace the rear headlight bulb of the 2017 Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today we will explain how to replace the bulb on a 2017 Nissan Qashqai. We start by opening the trunk and unscrewing the locking screws on the outer …
Replacing Rear Light on Nissan Qashqai
Replacing Rear Light on Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today, we will show you how to change the entire rear light housing on a Nissan Qashqai J10. Open the boot and unscrew the two side screws that secur…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos